Leaderboard

Hi David, It seems the handling of enum signals involves providing some buffer from the edges of the lane, which is not configurable. I was able to produce a fairly good alignment by using the Customize > Axis settings in the Details panel to turn of Auto scaling of the numeric signal and set the min and max to -90 and 450, resp.: This will work as long as all enum values appear in the time range of interest but will produce misalignment if a proper subset of these is in the time range, because for enums the axis is only labeled with the values of those enums that are found in the time range. Hopefully this works for your visualization; if not, it may make sense to file a support ticket for a feature request to have more control over the visualization of enumerated data.

thank you, that was it, just needed to define maximum duration of the capsule with "remove longer than" (as suggested by the program and worked)

If you modify your wind_dir variable to $wind_dir = group( capsule(0, 22.5).setProperty('Value', 'ENUM{{0|N}}'), capsule(22.5, 67.5).setProperty('Value', 'ENUM{{1|NE}}'), capsule(67.5, 112.5).setProperty('Value', 'ENUM{{2|E}}'), capsule(112.5, 158.5).setProperty('Value', 'ENUM{{3|SE}}'), capsule(158.5, 202.5).setProperty('Value', 'ENUM{{4|S}}'), capsule(202.5, 247.5).setProperty('Value', 'ENUM{{5|SW}}'), capsule(247.5, 292.5).setProperty('Value', 'ENUM{{6|W}}'), capsule(292.5, 337.5).setProperty('Value', 'ENUM{{7|NW}}'), capsule(337.5, 360).setProperty('Value', 'ENUM{{8|N}}') ) You will get an ordered Y axis: This is how Seeq handles enum Signal values from other systems - it has some limitations, but it seems like it should work well for your use case.