-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Library
Downloads
Gallery
Posts posted by robin
-
-
Thanks for the reply... using the standard deviation, based on Signal from condition is a Time-Weighted STD and this will not work... It should be an event weighted Standard Deviation (each individual can)
I will try your second suggestion....
-
I have a can line, that can handle 3 types of can sizes.... 400gr, 850gr and 900gr.
I have created a capsule, based on HI / LO limites (set in Asset Framework) and the CanSetpoint
Now I want to calculate the standard deviation of the can weight. These are individual measurements and the timing depends on the line speed (unknown)
I want to know the 10 minutes rolling standard deviation fill weight, within a capsule.
So start capsule 400gr can - xx amount of can - time 00:00:00 till 00:10:00 - STD
1 minute later: 400gr can - xx amount of can - time 00:01:00 till 00:11:00 - STD
etc...
Suggestions ...?
-
The problem is that the batchnr changes everytime... and the number of sub-batches also...
The first 7 char. are unique and than it can be 001 till .... 00y.
And we need to capture the total per unique batch xxxxxNR001 ... xxxxxNR00y for all batches, past , present and future...
-
-
-
-
THANKS !!!!!!!!!!!!!!!!!!!!
- 1
-
getting close.. 😉
impressed.... can we have a short call (webex or team) so I can explain hands on.... I work in GMT+1 timezone...
-
-
Dear....
I have a Question.... I have a continues batch process, marked by an UNIQUE Batch ID (Bleu stepped line) and I need to perform calculation per Batch ID.
How would I do that....
Calculation: tot rejects per batch, per signal
!!!..... but.... look closely.(SEE SECOND image...)... the batch step is triggered at the start of the filling process.... and some of the reject counter may still be working on the previous batch....
TIPS and TRICKS are welcom....
-
Event weighted Standard Deviation per 10 minutes
in General Seeq Discussions
Posted
@John Cox... almost... I found a signal that indicated the production status, independent of the Can Size. This is the right trigger to calculate the STD per can
I decrease the function to calculate it every 5 minutes, 30s
2 things.... can we add a (stepped) line.... and how we close the gaps... Due to calibrations, every 18 minutes or production interrupts there a gaps in the STD signal... can we fix this... ??
but many thanks for now... getting closer 😉