Displaying Multiple Data Series on a Single Scatter Plot

[Sepide]

In this example we want to plot both temperature signal and a model signal vs relative humidity in one scatter plot using Seeq.

Here are the Steps:

RAW Data: 

• Temperature (Area A)
• Temperature (Area B)
• X axis - Rel humidity (Area A)

 

Step 1. Delay one of the signals to make sure the data points for both signals are not aligned 

• Model (Area B)

  • $TempAreaB.delay(1min)

Step2. Combine the model and the temperature into one signal and set the max interpolation to 1 sec so it doesn't draw a line in between samples 

• Model & Temp Combined (Area A)

  • $Temp.combinewith($Model).setmaxinterpolation(1sec)

Step3. Create a condition per each sample in the Temperature and Model Signal 

• Temp Condition (Area A)

  • $Temp.setmaxinterpolation(1sec).isvalid()

• Model Condition (Area B)

  • $Model.setmaxinterpolation(1sec).isvalid()

Step 4. Go to Scatter plot and select "Relative Humidity" as the X-Axis and "Model &Temp Combined" as the Y Axis

Step 5. In Scatter Plot, select Model condition and Temperature condition for condition based coloring the sample points